Pipe End Facing Machine Manufacturer

Pipe End Facing Machine product view thumbnail

Pipe End Facing Machine for your component and the required production operation.

Application and machine selection

IMC supplies equipment and tooling to prepare pipe ends through the specified facing, chamfering or deburring operation. Start the selection with the finished component rather than a general machine label. The application details should include pipe material, diameter, wall thickness and the finished end-profile drawing. A drawing or representative sample helps establish what the proposed configuration needs to achieve.

Working arrangement

The setup review should cover cutters, pipe holding, end location and access to the surfaces being prepared. Compare these requirements with the technical data on this page and identify which model and accessories are being offered. Show the required end profile clearly; facing, chamfering and deburring are related but distinct operations. Any quoted output should be related to the actual stock, component and handling arrangement.

Agree the job and supply package

For sample acceptance, specify face geometry, chamfer dimensions where required and removal of unwanted burrs. Identify the inspection method in the component requirements. Include the batch size, utilities, delivery location and any spare-tool or installation needs. Select the available options and add the quantity to the Quote List; the offer should identify the machine and tools for this defined application.

Information to send with your enquiry

Pipe material
Diameter
Wall thickness and the finished end-profile drawing

To review your application, send IMC your component drawing and requirements. You can also compare related machines and tooling in the product range.

VIEW SPECIFICATIONS

CONFIGURE YOUR MACHINE

Available options

Select the required options and add this machine to your quotation.

Maximum Length Required

Min And Max Diameter of the Job

Expected Price

Purchase

BUYER INFORMATION

Price and Quotation Requirements

For a pipe end facing machine quotation, send pipe OD and wall, material, chamfer drawing, facing allowance, pipe length and required production rate. Confirm the selected configuration, included tooling and delivery requirements with IMC before ordering.

VIDEO REFERENCE

Machine Videos Gallery

No product-specific playlist is stored for this item yet. View IMC machine demonstrations and production videos in the main gallery.

View Machine Videos

TECHNICAL DATA

Technical Specifications

Model data and technical details supplied for this product. Final configuration can be confirmed against your application.

Pipe End Facing Machine is used to Chamfering and Deburring of the Pipes before Threading operation and Galvanizing. The Job is chamfered from the External, Internal and Front Face Three different tools. The Job remains still and the Facing Head rotates. The Slide manually move towards Facing Head for Chamfering. The Machine mainly consists of the following: -

Bed
Head Stock
Clamping Vice

Saddle

Specifications:

Model No.	IMC-EM- 1/2" to 1.1/2"	IMC-BM-1/2" to 4"
Min. Dia of Pipe to be Chamfered	1/2" N.B. Pipe	1/2"
Max. Dia of Pipe to be Chamfered	1.1/2"	4"
Cutting Tools Required (HSS 10% Cobalt)	3/8"	3/8"
Number of Spindle Speeds	Two nos.	Four nos.
Range of Spindle Speeds	37 to 64 RPM	68 to 180 RPM
Main Motor	3 H.P. 1440 RPM	3 H.P. 1440 RPM
Approx. Wt. of the Machine	750 Kgs.	1100 Kgs

Selecting Pipe End Facing Machine

Identify whether the job needs outside chamfer, inside chamfer, front facing or a combination. Include pipe wall thickness and the required end geometry in the drawing. Coordinate the finished end with the threading or other downstream process.

Frequently Asked Questions About Pipe End Facing Machine

What details are needed to select this product?

For Pipe End Facing Machine, provide pipe diameter and wall thickness; material; chamfer dimensions; edges to be prepared; output per shift. Include a drawing or sample so the requirement can be reviewed.

How are configuration and tooling confirmed?

Use the listed specifications as a starting point. Ask IMC to confirm the proposed configuration, compatible tooling and scope of supply for the actual component in the written quotation.

How do I request a quotation and support details?

Send your job details and production requirement through the enquiry form or contact IMC. Confirm inspection, installation, warranty, delivery and spare parts support for the configuration offered.